在線咨詢
聯系電話
400-182-9001
置頂
新能源
品質賦能平臺 聚力價值信任
新能源服務
Renewable Energy Services
ICAS英格爾能提供全面完善的新能源技術支持?光伏電站，風能電站及儲能電站其相關產品的檢測、認證、檢驗、分析到監造、盡職調查
致力于光伏組件與系統、風電、儲能關鍵部件的安全可靠、電站的安全可靠和高效，實驗室在提供包括歐標、美標、IEC標準的常規測試的同時，更可提供個性化非標和極限測試，及產品成分分析等特性化服務，部分測試項目和技術已達到國際領先水平，幫助企業實現產品深度研發、工藝改進、質控及上市后的采信。
ICAS can provide comprehensive testing, inspection and certification solutions in PV/wind/Energy storage field, including testing, inspeciton, certification, Due Diligence, etc. Through our technology services, we help clients to achieve the R&D of products, technology improvement, quality control, and admissibility after market.
服務優勢
Service Advantages
光伏服務
PV Services
至2022年底，ICAS英格爾已經為總計33.68GWp的電站和985臺風機提供了個性定制化的檢測檢驗與技術服務。
By the end of 2022, ICAS has provided comprehensive inspection and technical services for many PV power plants accumulated to 33.68GWp and 985 wind turbin
至2022年底，ICAS已經累計協助超過1035座光伏電站，總裝機量超過14.59GWp的項目完成交易或融資需求。
By the end of 2022, ICAS has assisted more than of more than 14.59 GWp to complete transactions or financing needs.1035 PV plants with a total installed capacity
2017年，ICAS英格爾成為國際電工委員會可再生能源設備認證互認體系（IECRE）認可的光伏檢驗認證機構。
In 2017,renewable energy applications.ICAS was accredited by IECRE as an entitled inspection body of
光伏組件與零部件實驗室測試
Lab Testing For PV Module &Components
ICAS英格爾是全國領先獲得IEC 61215:2021, IEC 61730-2:2016 等CNAS 實驗室測試能力認可機構。
ICAS is the leading testing body with CNAS accreditation of IEC 61215:2021, IEC 61730-2:2016.
常（高/低）溫動（靜）態機械載荷測試
Dynamic(Static)mechanical load test under normal (High/Low) temperature
鹽霧腐蝕測試
Salt Mist corrosion Test
光伏組件輻照度和溫度性能測試
Irradiance and temperature performance measurement for PV module
差異化耐候性測試服務
Differentiated weather resistance test services
光伏支架
Solar Tracker
光伏系統匯流箱
PV Combiner Box
光衰測試
LID Test
防火測試
Fire Test
光伏儲能
PV Energy Storage System
光伏材料成分分析
Analysis of formula and elements of PV products
氨氣測試
Ammonia Resistance Test
光伏電站平衡部件
Balance of System(BOS)
氣象監測站
Monitoring System
光伏逆變器
PV Inverters
沙塵測試
Dust and Sand Test
光伏電纜
PV Cable
運輸振動測試
Transportation Test
冰雹測試 (45mm)
Hail Test (45mm)
LeTID測試
Light and Elevated Temperature Induced Degradation Test
PID 測試 （±2000V）
PID Test （±2000V）
Panfile服務
Panfile Service
成分分析
Component Analysis
光伏部件認證服務
Certification For PV Parts
光伏組件
PV Module
儲能系統
Energy Storage System
光伏建筑一體化
BIPV
光伏輔材與零部件
PV Components and Materials
光伏系統平衡部件
PV BOS Components
光伏體系
IEC 62941：2019
光伏電站服務
Services For PV Power Plants
IECRE電站檢驗與認證
IECRE PV power plants inspection and certification
招標技術支持
Technical support for biding inviting
設計審核
Design review
系統安全評估
System safety assessments
設備監造與驗貨
Equipment production surveillance
系統效率
Performance ratio assessment
運維能力評估與認證
O&M company assessment and certification
咨詢與培訓
Consulting and Training
技術盡職調查
Technical Due Diligence (TDD)
效率及順耗分析
Performance ratio and de-rating diagnosis
綜合能源服務
Comprehensive Energy Services
無人機紅外巡檢與無人機EL檢測
Drone-based Infrared Thermography & Drone-based EL Detection
數字建模與全生命周期發電量預測
Digital Modeling and Life Cycle Energy Yield Forecast
電能質量評估
Po wer Quality Assessment
風電服務
Wind Energy Services
在風電領域，ICAS英格爾擁有資深的技據和便捷的解決方案，確保風電機組安全運行。術團隊和專業的風電設備，為企業客戶提供真實詳盡的數
ICAS英格爾的風電檢測方案基于《GB/Z 25458-2010 風力發電機組合格認證規則及程序》、《風力發電機組出質保模塊化驗收技術規范》、《英格爾風力發電機組在役檢測方案》,同時也參考其他國際和國家的標準及規范。
In the field of wind power, we have experienced experts and professional wind powereq uipment to provide you with detailed data and convenient solutions to ensure the safeoperation of your wind turbines.
ICAS -Wind power detection scheme《GB/Z 25458-2010 Qualification rules and proceduresof wind power generator sets》, 《Tech nical specification for acceptance of modular acceptanceof wind turbine》,《ICAS wind power generator unit in service detec tion scheme》Also referto otherinternationaland nationalstandards and norms.
特色服務
Key Services
風力發電機組齒輪箱密封性檢查
Inspection ofgear boxsealing ofwind turbine
風力發電機組制動器精度檢查
Inspection ofbrake precisionofwind generatorset
風力發電機組齒輪箱外觀檢查
Appearance inspection of gear box forwindturbine
風力發電機組接地電阻測試
Testfor groundingresistanceofwindturbine
風力發電機組可維護性和可維護性要求檢查
Check the maintainability and maintain ability of wind turbine
風力發電機組振動測試
Vibration test ofwind turbine generator
海上風力發電機組變流器噪聲測試
Noisetest of offshore wind turbine converter
風力發電機組各旋轉部件間隙檢查
Check the clearance between rotating parts ofwind turbine
無損探傷服務
Non-destructive testing
功率曲線一致性分析
Consistency Analysis of Wind Famm PowerCurve
風機出質保服務
Wind Turbine Quality Assurance Service
SCADA數據采集與監控
Supervisory Control and Data Acquisition (SCADA)
風電場技術盡職調查
Wind Power Station Technical Due Diligence (TDD)
風資源評估
Wind resource assessment
廣西玉林市福綿區福樟木鎮大水村福綿風電場
湖北隨縣萬和鎮龍泉風電場
廣西省玉林北流市隆盛鎮隆灣村隆潤風電場
黃海某300MW海上風電場工程
監造項目
Manufacture Supervision
塔筒監造 Tower tube supervision |
|
整機監造 The whole machine manufacturing |
|
關鍵零部件檢驗 Key parts inspection |
|
葉片監造 Leaf blade supervisor |
|
無損檢測服務
Non-destructive Testing Services
獲得檢測結果的同時，除了剔除不合格品外，不損失零件。
互容性同一零件可同時或依次采用不同的檢驗方法；而且又可重復地進行同一檢驗。
動態性可對使用中的零件進行檢驗，而且能夠適時考察產品運行期的累計影響。
嚴格性無損檢測技術必須具備專用儀器、設備；也需要專門培訓的檢驗人員，按照嚴格的規程和標準進行操作。
Non-destructiveWhen the test results are obtained, the parts are not lost except for the non-conforming products.
CompatibilityThe same parts can be tested in different ways at the same time or in sequence; And the same test can be repeated.
DynamicCan be used in the inspection of the parts, and timely investigate the cumulative impact of the product operation period.
StrictAdvanced equipments, qualified professionals and standardized operations are strictly requested.
儲能服務
Energy storage services
- GB/T 36547-2018 電化學儲能系統接入電網技術規定
- GB/T 36548-2018 電化學儲能系統接入電網測試規范
- 儲能系統設備監造（儲能電池艙、電池PACK、升壓變及預制艙、電芯、PCS等）
- 儲能電站并網驗收 Energy Storage Power Station Grid Connection Acceptance Test
- 儲能電站運行指標及評價服務 Energy Storage Power Station Operation Status Evaluation
- 儲能電站盡職調查 Energy Storage Power Station Technical Due Diligence
內蒙古光伏儲能3.5MWh電站檢測項目
服務項目
Services Available
山東鄒城風電場
寧夏寧東風電場
黑龍江風電場
監造項目
Manufacture Supervision
特色項目 Special items | 優勢 Advantage | 適用范圍 Scope of application |
|---|---|---|
X射線檢測 X ray detection | 底片便于保存能直觀的觀察工件內部缺陷及其分布體積型缺陷檢出率較高 The film is easy to save and can directly observe the internal defects of the workpiece and its distribution volume defect detection rate is high | 金屬材料焊縫、鑄件等 Metal material welding, casting, etc. |
超聲波檢測 Ultrasonic testing | 檢測厚度大、靈敏度高、速度快、能對缺陷進行定位和定量 The detection thickness is large, the sensitivity is high, the speed is fast, and can locate and quantify the defect | 金屬/非金屬材料的焊縫、鍛件、鑄件、管件等 Welding of metal/non-metallic materials, forgings, castings, fittings, etc. |
磁粉檢測 Magnetic particle testing | 可直觀顯示缺陷的形狀、大小和位置、靈敏度高、幾乎不受工件幾何形狀的影響、速度快 Visually display the shape, size and location of the defect,The sensitivity is high and it is hardly affected by the geometry of the workpiece | 鐵素體金屬材料 Ferritic metallic materials |
滲透檢測 Penetration testing | 可直觀顯示缺陷的形狀、大小和位置、靈敏度高 Visually display the shape, size and location of the defect,High sensitivity | 非多孔材料 Nonporous material |
超聲相控陣檢測 Ultrasonic phased array detection | 單探頭多角度、多掃描模式、效率高 Single probe multi-angle, multi-scan mode, high efficiency | 金屬/非金屬材料的焊縫、鍛件、鑄件、管件和形狀復雜工件 Weld, forging, casting, pipe fitting and shape complex workpiece for metal/non-metallic materials. |
超聲波衍射時差法 The ultrasonic diffraction method. | 可靠性好、精度高、圖像顯示直觀 Good reliability, high precision and visual display | 金屬材料焊縫 Metal weld |
渦流檢測 Eddy current testing | 不接觸、不破壞、效率高 No contact, no damage, high efficiency | 金屬材料表面 Metal surface |
聲發射檢測 Acoustic emission detection | 對線性缺陷比較敏感、幾乎不受工件幾何形狀的影響 It is sensitive to linear defects and is hardly affected by the geometry of the workpiece | 金屬壓力容器 Metal pressure vessel |
目視檢測 Visual detection | 方便、快捷、效率高 Convenient, quick and efficient | 金屬/非金屬材料 Metal/non-metallic materials |